I’m Sorry, Did I Roll My Eyes Out Loud? Embroidered Hat Patch

Tank Tops

• Unisex fit

• 100% ring-spun U.S. cotton

• Lightweight, breathable, and soft

• Sizes S–3XL

Short & Long-Sleeve T-Shirts

• Unisex fit

• 100% preshrunk ring-spun cotton

• Soft, durable, and comfortable for everyday wear

• Sizes S–3XL

Sweatshirts

• Unisex fit

• 50/50 cotton-polyester blend

• Warm, durable, and cozy

• Sizes S–3XL

Household Iron

An iron can be used, but results may vary.

You’ll need:

• Household iron (no steam)

• Parchment paper or thin cotton cloth

Steps:

1. 
   Set iron to Cotton / High Heat (turn OFF steam).
   
2. 
   Place garment on a firm, heat-safe surface.
   
3. 
   Position patch adhesive side down.
   
4. 
   Cover with parchment paper or cloth.
   
5. 
   Press iron firmly over the patch for 20–30 seconds, applying steady pressure.
   
6. 
   Lift iron (do not slide) and repeat as needed to cover the full patch.
   
7. 
   Allow garment to cool completely.
   

Check edges and re-press if necessary.

Heat Press

A heat press provides the best and most durable results.

You’ll need:

• Heat press

• Teflon sheet or parchment paper

Steps:

1. 
   Preheat heat press to 300–320°F.
   
2. 
   Place garment on the press and pre-press for 5 seconds to remove moisture and wrinkles.
   
3. 
   Position the patch adhesive side down where desired.
   
4. 
   Cover with a Teflon sheet or parchment paper.
   
5. 
   Press with firm pressure for 12–15 seconds.
   
6. 
   Allow garment to cool completely.
   

Check edges—if needed, re-cover and press for an additional 5–8 seconds.

Spangle and fuzzy patches are decorative heat-applied patches

• These patches require backing removal before application

🔥 IMPORTANT: Remove Backing First

Before applying, carefully remove the clear or white backing layer from the patch.

⚠️ Do NOT apply with the backing still attached, as the adhesive will not activate correctly.

Heat Press

A heat press provides the best and most durable results.

You’ll need:

• Heat press

• Teflon sheet or parchment paper

Steps:

1. 
   Remove backing from the patch completely.
   
2. 
   Preheat heat press to 300–315°F.
   
3. 
   Pre-press garment for 5 seconds to remove moisture.
   
4. 
   Place patch adhesive side down on garment.
   
5. 
   Cover with Teflon or parchment paper.
   
6. 
   Press with firm pressure for 12–15 seconds.
   
7. 
   Allow garment to cool completely.
   
8. 
   Check edges and re-press for 5–8 seconds if needed.
   

⚠️ Alternate Method: Household Iron (Use with Caution)

Iron application is possible but less reliable for spangle and fuzzy patches.

Steps:

1. 
   Remove backing first.
   
2. 
   Set iron to High / Cotton (no steam).
   
3. 
   Place garment on a firm, heat-safe surface.
   
4. 
   Cover patch with parchment paper or thin cloth.
   
5. 
   Press firmly for 20–30 seconds (do not slide iron).
   
6. 
   Repeat as needed until fully adhered.
   
7. 
   Allow to cool completely and check edges.
   

🧼 Care Instructions

• Wait 24 hours before washing

• Wash inside out on cold, gentle cycle

• Do not bleach

• Tumble dry low or air dry

• Do not iron directly on the patch

⚠️ Important Notes

• Backing must be removed prior to application

• Not recommended for heat-sensitive fabrics

• Professional heat application is strongly recommended

• Improper application may cause lifting or damage

Questions about compatibility or application? Contact us before ordering.

📧 Contact: info@tlckraftydesigns.com

Standard Processing & Shipping

Orders are handmade and processed within 5–8 business days once all items in your order are ready. Shipping time is in addition to processing.

Rush / Expedited Shipping

Need it sooner? Expedited shipping options are available at checkout for an additional fee once items are ready.

Please Note

Changes to your order—such as cancellations, combining orders, address updates, or shipping preference changes—may impact delivery timelines and free shipping eligibility.

Because our items are made to order, we are unable to accept returns or exchanges.

If your order arrives with an issue—such as receiving the wrong item, a defect, or a significant error—please contact us within 48 hours of delivery so we can make it right.

Contact: info@tlckraftydesigns.com

Each item is handmade to order, and slight variations in color, placement, or finish may occur. These variations are a natural part of the handcrafted process and make each piece unique.

If you have any questions or concerns about your order, please reach out to us—we’re always happy to help.

📧 Contact: info@tlckraftydesigns.com

Patches on Apparel

• Turn garment inside out

• Cold wash on gentle cycle

• No bleach or fabric softener

• Tumble dry low or hang dry

• Do not iron directly on the patch (use a pressing cloth if needed)

Regular Apparel

• Turn garment inside out

• Cold wash on gentle cycle

• No bleach

• Tumble dry low or hang dry

• Iron inside out if needed